• 3
  • 4
  • c1
  • c2
  • c3
Aerosols
Atomizers
Perfumes
Filling lines
Closing Machines
Pharma

Atomizers
Perfumes

Find out more Aerozole
Automatic Machines Automatic Production Lines
close
movie Watch: Movies

Filling lines
Closing Machines

Aerozole
Filling
close
movie Watch: Movies

Pharma

Aerozole
close
movie Watch: Movies

AUTOMATIC INDEXING MODULE

TYPE: AMR Z-1021

Automatic indexing module AMR type Z-1000 is one of the basic components of an automatic production line. Through the use of different operating heads (depending on the order and the type of product filled on the line) the unit may have many purposes. The design of the module enables use of 1 to 9 working heads (executive modules) .

In order to get more details please watch the video showing the unit working in an automatic production line.

You can order the device in the special design, adapted for use in EX zone with all the necessary approvals for zones 1 or 2 (according to 99/92 /EC).

- Inserting a steel balls into an empty cans (in case of lacquer filling)
- Dispensing bulk products into cans (in case of pharmaceutical products)
- Dispensing liquid products into cans
- Valve placing in cans
- Control of a valve presence in cans
- Sealing valves on cans
- Other, depending on the equipment options

Dosage range: up to 1,000 ml - with four filling heads
Types of used valves: 1" (1 inch) aluminum or steel valves with or without a dip tube (depending on options)
Type of crimping head: for aerosol valves with a diameter of 1"
Supported cans with height of: 65 - 330 mm
Supported cans with diameters of: 35 - 66 mm (larger diameters available on special order)

Usually it is assumed at 1,000 ÷ 3,000 pcs/h (16 ÷ 50 pcs/min). The maximum capacity of the system stands at 3,600 pcs/h (60 pcs/min) and depends on a type of product and the size of cans used in the process.

Depending on the configuration of machines in a production line the machine can be made with alternative versions of can input and output systems, i. e. following types: Z-1035 and Z-1200.

Capacity: 3,000 pcs/h (50 pcs/min)
Required air pressure: 0.6 MPa (6 bar)

Width: 1230 mm
Length: 1220 mm
Height: 1800 mm
Weight: ~ 700 kg

Power type: Pneumatic
Required air pressure: 0,8 ÷ 1,0 MPa (8 ÷ 10 bar)
Quality of compressed air: class IV (according to ISO 8573-1) for temperatures of 15  ÷ 35°C

Capacity: 3,000 – 3,600 pcs/h (50 - 60 pcs/min)
Required air pressure: 0.6 MPa (6 bar)

Width: 1600 mm
Length: 1200 mm
Height: 2050 mm
Weight: ~ 850 kg

Power type: Pneumatic
Required air pressure: 0,8 ÷ 1,0 MPa (8 ÷ 10 bar)
Quality of compressed air: class IV (according to ISO 8573-1) for temperatures 15 ÷ 35°C

 

Contact

ZIGLER POLSKA Sp. z o.o.
7 Braci Gutmanów st
(entrance at:17 Krakowska st)
43-600 Jaworzno - PL

tel. +48 32 616 36 70
tel. +48 600 248 079
e-mail: zigler@zigler.pl
e-mail: biuro@zigler.pl

www.zigler.pl

All rights reserved
© Zigler 2014