AEROSOLS

FILLING AND CLOSING AUTOMATIC INDEXING MODULE TYPE Z-1015

Filling and Closing Automatic Indexing Module Z-1015 is part of automatic aerosol production line and is intended for the completion of the following production phases:

  • Filling aerosol cans with liquid product - performed using 1-3 filling modules (depending on order).
  • Inserting valves into aerosol cans - performed by a valve inserter with an valve presence check module.
  • Crimping the inserted valves.
  • Putting filled and crimped cans back on conveyor.

Scroll down

Working parameters
Working parameters
Capacity:
1000 ÷ 3600 units/hour. (16 ÷ 60 units/minute)
Operation pressure:
0,6 ÷ 0,8 MPa (6 ÷ 8 bar)
Dimensions and weight
Width:
1270 mm
Length:
1455 mm
Height:
1875 mm
Weight:
~540 kg
Power supply
Supply type:
Pneumatic
Required supply pressure:
0,8 ÷ 1,0 MPa (8 ÷ 10 bar)
Compressed air quality:
Class IV according to ISO 8573-1 standard for temp. 15 ÷ 35°C
Connection:
External thread G¾”
Liquid product connection
Required product pressure:
0.3 - 1 MPa (3 - 10 bar) – depending on the product density and viscosity
Connection:
G½” external BSPP thread with 60° cone to each filling module
FILLING AND CLOSING AUTOMATIC INDEXING MODULE TYPE Z-1015 - Zigler
FILLING AND CLOSING AUTOMATIC INDEXING MODULE TYPE Z-1015 - Zigler