AEROSOLS

FILLING AND CLOSING AUTOMATIC INDEXING MODULE TYPE Z-1059

Filling and Closing Automatic Indexing Module Z-1059 is part of automatic aerosol production line and is intended for the completion of the following production phases:

  • Collecting empty cans with valves from conveyor;
  • Filling aerosol cans with liquid product - performed using 1 or 2 filling modules with maximum dose up to 510 ml each (depending on order).
  • Inserting valves into aerosol cans - performed by a valve inserter with an valve presence check module.
  • Crimping the inserted aerosol valves (with optional vacuum).
  • Gasifying aerosol cans - performed using 1 or 2 gasifying modules with maximum dose up to 510 ml each (depending on order).
  • Placing finished product back on conveyor belt.

Scroll down

Working parameters
Working parameters
Capacity:
1000 ÷ 3600 pcs/h (16 ÷ 60 pcs/min) – depending on propellant and product dose or valve type
Product dose:
Up to 510 ml for each module
Gas dose:
Up to 510 ml for each module
Containers diameter:
ø35 mm ÷ ø66 mm
Containers height:
65 mm ÷ 320 mm
Dimensions and weight
Width:
1450 mm
Length:
1320 mm
Height:
1840 mm
Weight:
~665 kg
Power supply
Supply type:
Pneumatic
Required supply pressure:
0.8 ÷ 1.0 MPa (8 ÷ 10 bar)
Compressed air quality:
Class IV according to ISO 8573-1 standard for temp. 15 ÷ 35°C
Connection:
External thread G¾”
Liquid product connection
Supply pressure:
0.3 - 1 MPa (3 - 10 bar) – depending on the product density and viscosity
Connection size:
External thread G ½” to each filling module
Propellant connection
Supply pressure:
5 bar above propellant vapour pressure
Product connection:
G½” external BSPP thread with 60° cone to each gasifying module
FILLING AND CLOSING AUTOMATIC INDEXING MODULE TYPE Z-1059 - Zigler